Engineered for inclined driveways, restricted turning areas, and wide residential or commercial entrances, every electric sliding gate by Arts of Steel Limited is bespoke-fabricated in our Surrey workshop. Explore 6 completed sliding gate projects plus our universal-beam track and EN 13241-1 safety engineering guide below—click any thumbnail to inspect technical details.
Fabricated from matching heavy-gauge wrought iron sections, this complete frontage combines a classic electric sliding driveway gate, pedestrian side gate, and boundary railings with alternating 20mm and 16mm square vertical bars, 150mm × 150mm steel posts with spheres and flanges, and colour-matched pier lights.
The purpose-made galvanised ground track was welded onto a structural universal beam and set in reinforced concrete to eliminate ground movement. Double-bearing support wheels are nested neatly inside the lower frame, paired with bespoke upgraded roller brackets and full-close catching nests to prevent lifting or de-tracking.
Built from a 50mm steel frame profile with alternating 20mm and 16mm square vertical bars, this bow-top sliding gate was engineered with a central visual split to give the symmetrical appearance of a classic double-leaf swing gate, finished with lower aluminium privacy panels powder-coated in a contrasting shade.
Support rollers are recessed directly inside the lower frame while the upright guide mechanism is bolted cleanly at the rear. Both the galvanised ground track and the gate operator foundation plate were pre-welded onto a universal beam before concreting for permanent alignment.
Engineered for complete visual privacy and perimeter security, this sliding gate, return panel, and flanking railing system combines alternating 25mm and 19mm solid round bars with 100mm × 100mm decorative-topped steel support posts.
Full-height aluminium privacy panels were powder-coated to match the metalwork and mechanically secured to the rear of the frame by drilling, tapping, and bolting—supported on a universal-beam galvanised track with nested double-bearing wheels and anti-de-tracking end nests.
Designed to complement the architectural style of the property, this classic electric sliding gate and flanking boundary railing system features alternating 20mm and 16mm solid round vertical bars supported by 100mm × 100mm square steel pillars.
The purpose-made galvanised ground track and support mechanisms were set in quick-set, early-strength reinforced concrete, paired with nested double-bearing support wheels, custom guide roller brackets, and full-close anti-de-tracking nests.
Engineered to blend seamlessly with the boundary fencing, this wide sliding gate uses a 100mm × 100mm lower hollow-section beam (housing nested double-bearing wheels) and three horizontal U-channels holding carriage-bolted backing rails so feather-edge or custom timber boards can be fixed securely.
The galvanised floor track is anchored onto flat concrete with stainless steel studs and chemical resin. Due to the wide span, dual support posts equipped with guide rollers prevent lateral sway during travel, locked into heavy catching nests at full close.
Two matching bow-top electric sliding gates designed to replicate classic double-hinged driveway gates, accompanied by a matching pedestrian gate, boundary railings with alternating 20mm and 16mm round bars, and lights mounted on the inner face of the brick piers.
Both galvanised ground tracks are set in early-strength reinforced concrete with nested double-bearing support wheels, custom anti-lift guide brackets, full-close catching nests, and safety photocells protecting both sides of each driveway opening.
We specify purpose-made galvanised ground tracks to prevent rust staining on granite setts or resin-bound gravel, pre-welded onto a structural universal steel beam (alongside the motor foundation plate) so soft ground can never cause track settlement. Inside the gate frame, nested double-bearing support wheels eliminate lateral wobble and extend service life.
A horizontal guide angle positioned above the heavier lower gate section keeps the gate balanced upright. Full-height safety posts carry bespoke fabricated brackets with overlapping anti-lift guards and self-lubricating nylon-dressed bearing rollers, while full-close catching nests lock the leading edge against wind load, vandalism, and de-tracking.
Every Arts of Steel sliding gate is CE-marked, risk-assessed, and commissioned to EN 13241-1, EN 12453, and EN 12445—verified with a calibrated impact force tester (maximum 400N dynamic force within the final 50–500mm of travel, dropping below 150N within 0.75s and 25N within 5s) with a complete 7-year technical compliance file.
Ideal for inclined driveways, short driveway aprons, and wide residential or commercial entrances across Surrey, West Byfleet, Weybridge, Ripley, Woking, Guildford, and SW London, every sliding gate by Arts of Steel Limited is engineered in-house—from CAD drawings and universal-beam galvanised ground tracks to double-hinged lookalike designs, aluminium-boarded privacy gates, and timber-infill sliding gates.
To arrange a site survey or technical consultation, please contact our engineering team. Alternatively, you can view the Electric Sliding Gates Gallery here or browse our Master Project Gallery by clicking here.